Name

tcfilters — shorewall6 u32/basic classifier rules file

Synopsis

/etc/shorewall6/tcfilters

Description

Entries in this file cause packets to be classified for traffic shaping.

Beginning with Shorewall 4.4.15, the file may contain entries for both IPv4 and IPv6. By default, all rules apply to IPv6 but that can be changed by inserting a line as follows:

IPV4

Following entries apply to IPv4.

IPV6

Following entries apply to IPv6

ALL

Following entries apply to both IPv4 and IPv6. Each entry is processed twice; once for IPv4 and once for IPv6.

The columns in the file are as follows (where the column name is followed by a different name in parentheses, the different name is used in the alternate specification syntax).

CLASS - interface:class

The name or number of an interface defined in shorewall6-tcdevices(5) followed by a class number defined for that interface in shorewall6-tcclasses(5).

SOURCE - {-|address|+ipset}

Source of the packet. May be a host or network address. DNS names are not allowed. Beginning with Shorewall 4.6.0, an ipset name (prefixed with '+') may be used if your kernel and ip6tables have the Basic Ematch capability and you set BASIC_FILTERS=Yes in shorewall6.conf (5). The ipset name may optionally be followed by a number or a comma separated list of src and/or dst enclosed in square brackets ([...]). See shorewall6-ipsets(5) for details.

DEST - {-|address|+ipset}

Destination of the packet. May be a host or network address. DNS names are not allowed. Beginning with Shorewall 4.6.0, an ipset name (prefixed with '+') may be used if your kernel and ip6tables have the Basic Ematch capability and you set BASIC_FILTERS=Yes in shorewall6.conf (5). The ipset name may optionally be followed by a number or a comma separated list of src and/or dst enclosed in square brackets ([...]). See shorewall6-ipsets(5) for details.

PROTO - {-|{protocol-number|protocol-name|all}[,...]}

Protocol.

Beginning with Shorewall 4.5.12, this column can accept a comma-separated list of protocols.

DEST PORT (dport) - [-|port-name-or-number]

Optional destination Ports. A Port name (from services(5)) or a port number; if the protocol is icmp, this column is interpreted as the destination icmp-type(s).

SOURCE PORT (sport) - [-|port-name-or-number]

Optional source port.

TOS - [-|tos]

Optional - specifies the value of the TOS field. The tos value can be any of the following:

  • tos-minimize-delay

  • tos-maximize-throughput

  • tos-maximize-reliability

  • tos-minimize-cost

  • tos-normal-service

  • hex-number

  • hex-number/hex-number

The hex-numbers must be exactly two digits (e.g., 0x04)x.

LENGTH - [-|number]

Optional. Must be a power of 2 between 32 and 8192 inclusive. Packets with a total length that is strictly less than the specified number will match the rule.

PRIORITY - [-|number]

Added in Shorewall 4.5.8. Specifies the rule priority. The priority value must be > 0 and <= 65535.

When a priority is not given:

  • For Shorewall versions prior to 4.5.8 - all filters have priority 11.

  • For Shorewall 4.5.8 and later - for each device, the compiler maintains a high-water priority with an initial value of 0. When a filter has no priority, the high-water priority is incremented by 1 and assigned to the filter. When a priority greater than the high-water priority is entered in this column, the high-water priority is set to the specified priority. An attempt to assign a priority value greater than 65535 (explicitly or implicitly) raises an error.

The default priority values used by other Shorewall-generated filters are as follows:

  • Classify by packet mark - ( class priority << 8 ) | 20.

  • Ingress policing - 10

  • Simple TC ACK packets - 1

  • Complex TC ACK packets - ( class priority << 8 ) | 20.

  • Classify by TOS - ( class priority << 8 ) | 15.

  • Class with 'occurs' - 65535

Example

Example 1:

Place all 'ping' traffic on interface 1 in class 10. Note that ALL cannot be used because IPv4 ICMP and IPv6 ICMP are two different protocols.

       #CLASS    SOURCE    DEST         PROTO   DEST
       #                                        PORT

       IPV4

       1:10      0.0.0.0/0 0.0.0.0/0    icmp    echo-request
       1:10      0.0.0.0/0 0.0.0.0/0    icmp    echo-reply

       IPV6

       1:10      ::/0      ::/0         icmp6   echo-request
       1:10      ::/0      ::/0         icmp6   echo-reply
Example 2:

Add two filters with priority 10 (Shorewall 4.5.8 or later).

       #CLASS    SOURCE    DEST         PROTO   DEST            PRIORITY
       #                                        PORT

       IPV6

       1:10      ::/0      ::/0         icmp    echo-request    10
       1:10      ::/0      ::/0         icmp    echo-reply      10

FILES

/etc/shorewall6/tcfilters

Documentation


Frequently Used Articles

- FAQs - IPv4 Manpages - IPv6 Manpages - Configuration File Basics - Beginner Documentation - Troubleshooting

Shorewall 4.0/4.2 Documentation


Current HOWTOs and Other Articles

- 6to4 and 6in4 Tunnels - Accounting - Actions - Aliased (virtual) Interfaces (e.g., eth0:0) - Anatomy of Shorewall - Anti-Spoofing Measures - AUDIT Target support - Bandwidth Control - Blacklisting/Whitelisting - Bridge/Firewall - Building Shorewall from GIT - Commands - Compiled Programs - Configuration File Basics - DHCP - DNAT - Dynamic Zones - ECN Disabling by host or subnet - Events - Extension Scripts - Fallback/Uninstall - FAQs - Features - Fool's Firewall - Forwarding Traffic on the Same Interface - FTP and Shorewall - Helpers/Helper Modules - Installation/Upgrade - IPP2P - IPSEC - Ipsets - IPv6 Support - ISO 3661 Country Codes - Kazaa Filtering - Kernel Configuration - KVM (Kernel-mode Virtual Machine) - Limiting Connection Rates - Linux Containers (LXC) - Linux-vserver - Logging - Macros - MAC Verification - Manpages (IPv4) (IPv6) - Manual Chains - Masquerading - Multiple Internet Connections from a Single Firewall - Multiple Zones Through One Interface - My Shorewall Configuration - Netfilter Overview - Network Mapping - No firewalling of traffic between bridge port - One-to-one NAT - Operating Shorewall - OpenVPN - OpenVZ - Packet Marking - Packet Processing in a Shorewall-based Firewall - 'Ping' Management - Port Forwarding - Port Information - Port Knocking (deprecated) - Port Knocking, Auto Blacklisting and Other Uses of the 'Recent Match' - PPTP - Proxy ARP - QuickStart Guides - Release Model - Requirements - Routing and Shorewall - Routing on One Interface - Samba - Shorewall Events - Shorewall Init - Shorewall Lite - Shorewall on a Laptop - Shorewall Perl - Shorewall Setup Guide - SMB - SNAT - Split DNS the Easy Way - Squid with Shorewall - Starting/stopping the Firewall - Static (one-to-one) NAT - Support - Tips and Hints - Traffic Shaping/QOS - Simple - Traffic Shaping/QOS - Complex - Transparent Proxy - UPnP - Upgrade Issues - Upgrading to Shorewall 4.4 (Upgrading Debian Lenny to Squeeze) - VPN - VPN Passthrough - White List Creation - Xen - Shorewall in a Bridged Xen DomU - Xen - Shorewall in Routed Xen Dom0

Top of Page